Offshoreonly.com - Paint for Engine Bay

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Paint for Engine Bay (https://www.offshoreonly.com/forums/general-q/76988-paint-engine-bay.html)

Bam Bam

04-19-2004 08:42 AM

Paint for Engine Bay

What paint should one use in the engine bay? What do you need to do to prep the area being painted?

p4-33

04-19-2004 09:49 AM

I use Interlux BilgeKote. I like white as it is easier to spot leaks. Also, it doesn't require primer.

Scrape, sand, and then wipe down with something strong enough to remove any greasy film, yet evaporate completely dry. I use acetone, and have probably lost some braincells in the process. Good ventillation is a plus.

Have fun,
Brian

blue thunder

04-19-2004 05:01 PM

1 Attachment(s)

I used bilgekote last year. Still looks good. Use a good grease cutter, scuff then brake clean. Also used charcoil respirator.

blue thunder

04-19-2004 05:04 PM

1 Attachment(s)

Here it is a year later. I did do some minor touchup but still going strong.

BT :cool:

offthefront

04-19-2004 08:48 PM

Nice ... what motors ? that Closed cooling ....that the standard setup ?

Bam Bam

04-20-2004 10:13 AM

Thanks for the info. Not looking forward to this job, but it looks like crap right now.

blue thunder

04-20-2004 11:44 AM

Quote:

Originally posted by offthefront
Nice ... what motors ? that Closed cooling ....that the standard setup ?

Thanks offthefront. 468s and the closed cooling is aftermarket. Not sure of the brand, I just rerigged it a little for my use.

BT :cool:

All times are GMT -5. The time now is 11:12 AM.