525SC Specs
 

I need and info, specs pics of a 525SC. I am building a copy of one and any info would help.

KC, what exactly do you need????

I'm at work now, but I've got all the specs at home with many of the part #'s.

Anything and everything. I am building one.

454, 7.5:1 CR, forged crank & internals, rectangular port heads, roller rockers, hydraulic cam (dont have specs on me) 2.25/1.88 valves, 177 weiand blower, 5 psi, gil exhaust, Tbolt IV ignition. That's all that comes to mind.
Gary

The cam is a Crane #132561

Specs are 228/236 .530/.551 on a 114 lobe sep.

The ignition timing curve is set up with 13* base timing and 22* advance. It advances to 25* by 2000rpms and then gradually advances up to full advance of 35* by 4500rpms.

Carb is a 1050 dominator
Jets are 98's all around--I think(Holley #122-98)
6.5 PV's front & back
#35 Acelerator nozzles
50cc acc pumps front & back
Acc pump cams-frt& rear--white-use # 1 hole.

Boost is set at 5.5# stock with a 2:1 ratio

Pistons are forged TRW #L2453

Valves are 2.19/1.88

Thanks guys

ttt

i had a copy biult and havebeen very happy iwth it. I'm kaing 550 with my setup.

if you want eth build sheet i'll gladly scan and post it!

Puder that would be great.