sbc centerbolt valve covers
 

just built my new sbc strokers i have roller rockers which means i need tall valve covers.the problem is i have powerflo exhaust with ss risers and can't find valve covers that will fit without hitting the exhaust.iv'e checked with imco eddie marine rexmar they seem to be really into big blocks.please help

ttt

Sonic,
We cast a set that is .500" taller and clears the rockers. Sterling, Rexmarine, Crockett are all dealers of ours.

Chris

hi chris
thank you i just called rexmar and they carry buy dont stock.i asked about baffles and oil fills and they stated they only come thru plain.can you help me out?
thank you paul

Paul,
We can put anything into the valve cover. . .oil fills, breathers, PCV holes, . . .would be lead time because we are busy. You can buy the breathers and oil fill cap and have a local shop install.

Chris

Re: sbc centerbolt valve covers
 

I also ran into the same deal...I went with the moroso valve covers....They are made with extra clearance for rockers. I have used the Comp Cams roller rockers and now Crane Gold. No problems. I bought mine at Jegs. Kinda pricey buy Top quality...

BH

hey bh do you have their part# also can you remove them with out losening the exhaust.

When I ran those centerbolt covers with crane gold roller rockers I was able to cut some of the supports out of the stock covers and they fit fine. Just have to use narrow bodied rockers.

Here you go. I don't need to remove the exhaust to get them off either:D. Like I said they are pricey but VERY High quality.http://www.jegs.com//cgi-bin/ncommer...73&prmenbr=361

BH