![]() |
Stereo Noise
FOR ALL OF YOU SOUND EXPERTS. JUST UPGRADED THE STEREO AND PUT IN 2 AMPS, ONE FOR THE SPEAKERS, ONE FOR THE SUBS. WHEN TRIMMING THE DRIVES OF K-PLANES, I GET A POPPING FROM THE SPEAKERS. NO OTHER ELECTRICAL DEVICE OR SWITCH INTERFERES. WHAT IS THE PROBLEM/SOLUTION?
|
Re: Stereo Noise
Originally posted by KBUSH1 FOR ALL OF YOU SOUND EXPERTS. JUST UPGRADED THE STEREO AND PUT IN 2 AMPS, ONE FOR THE SPEAKERS, ONE FOR THE SUBS. WHEN TRIMMING THE DRIVES OF K-PLANES, I GET A POPPING FROM THE SPEAKERS. NO OTHER ELECTRICAL DEVICE OR SWITCH INTERFERES. WHAT IS THE PROBLEM/SOLUTION? Is the stereo that loud you have to shout when you ask a question:rolleyes: (turn off the caps) Turn off the stereo when you use the trim and the speakers will stop popping.:D Just kidding the following link should help noise search info on 12v.com |
go to "the12volt.com" I built my whole stereo system by asking questions on this sight, and it is awesome!!!!
|
You have a problem with your ground. Where did you ground the amps?
|
both amps are ground to the same battery.
|
You could also have a bad ground on your trim pump causeing this. Check for corroded cables and stuff like that.
Jon |
Re: Stereo Noise
Audiofin, can you drop me an email? I would like to speak to you about some Babbs. [email protected]
|
| All times are GMT -5. The time now is 11:36 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.