Offshoreonly.com - Depth gauge

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Depth gauge (https://www.offshoreonly.com/forums/general-q/80220-depth-gauge.html)

blownboat

05-30-2004 12:39 PM

Depth gauge

Installed depth gauge,works good with motor off. When motor is running depth gauge (livorsi)bounces to 500 feet and flashes,bounces all over, not accurate. Has any one had any problems with their gauge being effected by their rpm gauge. Any ideas would be great. Thanks. :eek:

BajaBuddy

05-31-2004 12:15 AM

Re: Depth gauge

Is it stuck tight against the hull? Did you used epoxy to install it?

blownboat

05-31-2004 12:39 AM

Re: Depth gauge

Stuck tight with epoxy. I think the other wires that the transducer wire is running against are affecting it. Just wondering if anyone else had this problem.

BajaBuddy

05-31-2004 10:50 AM

Re: Depth gauge

The wirings not too complicated with a depth finder. Do you have a good ground?

All times are GMT -5. The time now is 07:56 PM.