Drive Coupler
#1
VIP Member
VIP Member
Thread Starter
Drive Coupler
I have a 1999 7.4MPI hooked to a 1997 Bravo drive.
The coupler exploded last night, probably an alignment issue.
Anyway, I was just quoted $380 for a new coupler.
Does this seem high?
Anyone know where I can get one mail order for less?
Thanks
The coupler exploded last night, probably an alignment issue.
Anyway, I was just quoted $380 for a new coupler.
Does this seem high?
Anyone know where I can get one mail order for less?
Thanks
__________________
Patrick
Patrick
#2
Registered
Join Date: Sep 2001
Location: Lake St. Clair
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drive Coupler
I think this may be aftermarket stuff, but click here to view part prices:
http://ebasicpower.american-data.net...2/merchant.mv?
Was that the price to put the thing in, or just the part............cause you gotta pull the engineout to do it ? I know the original merc ones are a bit more than this.
Hope this helps,
RJ
http://ebasicpower.american-data.net...2/merchant.mv?
Was that the price to put the thing in, or just the part............cause you gotta pull the engineout to do it ? I know the original merc ones are a bit more than this.
Hope this helps,
RJ
#4
Registered
Re: Drive Coupler
http://cpperformance.com/ I bought the HP couplers for $250.00
Last edited by Pure Energy; 06-16-2004 at 02:04 PM.
#5
VIP Member
VIP Member
Thread Starter
Re: Drive Coupler
List price $384 for the coupler only...
$75 per hour labor for the "experts" to screw up the alignment again.
I'll do the job my self.
30 pack of beer for my friend with the hoist.
$75 per hour labor for the "experts" to screw up the alignment again.
I'll do the job my self.
30 pack of beer for my friend with the hoist.
__________________
Patrick
Patrick
#6
Registered
Join Date: Nov 2000
Location: Sevierville,TN
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drive Coupler
Merc sells diffferent types couplers for the Bravo drives
Most OE Merc Mags couplers have an aluminum spline
I paid the extra $$$$$$ and got the one with a STEEL spline. They list it for High Performance, work boats and Trawlers.
Most OE Merc Mags couplers have an aluminum spline
I paid the extra $$$$$$ and got the one with a STEEL spline. They list it for High Performance, work boats and Trawlers.
#7
Registered
Join Date: Oct 2000
Location: Fells Point MD
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drive Coupler
I have one out of an HP500 with 80 hours on it. I only replaced it because I pulled the motor for a Gimbal repair. I'll sell it for $100 plus shipping.
Shawn
Shawn