|
thermostat install
I saw a couple earlier posts regarding this but still had a few questions. OK I have an 89 454 mag with I guess the earlier thermostat housing. (6 outlet).
Can I use the blue-style fel-pro gasket material and make them myself? Also how would Hylomar work in this type of application? Would you apply any sealant to the cork gasket or is that not done? Anything I am missing? THanks again! |
Re: thermostat install
1 Attachment(s)
Originally Posted by challenger454
I saw a couple earlier posts regarding this but still had a few questions. OK I have an 89 454 mag with I guess the earlier thermostat housing. (6 outlet).
Can I use the blue-style fel-pro gasket material and make them myself? Also how would Hylomar work in this type of application? Would you apply any sealant to the cork gasket or is that not done? Anything I am missing? THanks again! ______________________________ Just did this and NO do not make your own Gasket, they are around 5.00 or less depending on where you get them. You MUST clean the surfaces to get a good seat it can be a PITA but needs to be done. Follow these links for parts. http://www.mercruiserparts.com/selec...doc_nbr=+19378 Good luck, its an easy job I know because I did it. fightclub. |
Re: thermostat install
Brad you coming down for SOTW??? I'll be up in your neck of the woods (Elkrapids) soon...July 12-18 and August 9-15
|
| All times are GMT -5. The time now is 12:39 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.