![]() |
Carb problems
When turning the engine over and not giving it any throttle gas just continuously spills into the intake until all fuel pressure has bled off. Took float bowl off and appears fine inside. Do I need to get a new needle and seat for the float?
Jason |
Re: Carb problems
You are definately on the right track, needle and seat are first to change. Also, make sure float is adjusted to correct height.
|
Re: Carb problems
Make sure the float doesn't have gas inside it. Any liquid inside will cause the carb to flood the engine.
Are you running an electric pump? If so, do you have a pressure regulator in line? Fuel pressure shouldn't be over 6 psi. |
Re: Carb problems
Mechanical fuel pump on a sbc.
|
| All times are GMT -5. The time now is 04:18 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.