Zanie

So I'm slowly getting the pieces together for changing my Excalibur over from TRS to Bravo.
I'm working on the drive oil reservoir bottles
The round mayonnaise jar type reservoir bottles have been discontinued.
So I'm going to need the square ones, one left and one right, mounting brackets and all.
What is the correct mercury part number for a complete reservoir bottle kit?
Is it 806193A20?
Is it 806193A48?
Is it 806193A49?
Does the bottle come with the low level sensor?
Any help would be greatly appreciated.
Thanks,
Dan

pier3pressure

Revolution Marine makes a solid replacement product. Looking at switching mine out as well

http://revolutionmarine.com/shopsite...eservoirs.html

Krumbsnatcher

Those are nice, where was this post when i was looking to replace, oh well.

CMG

Do not buy the round rez if you find them, Notorious leakers.

part # 3A48 $66.95 http://www.mercstuff.com/monitorinstructions.htm

Same for both sides, I swapped mine recently, real easy. Mount to your transom.

Good luck,

MILD THUNDER

iTrader: (3)

I just bought a kit from mercstuff.com. Came with everthing you need(fittings, hoses, bottle, bracket etc.) I paid 89.95

Zanie

OK, now we are loosing ground!
Forget the 3A20.
So it's either the 3A48 or 3A49.
What does 3A49 come with that 3A48 does not?
DS