Offshoreonly.com - Gaffrig Shifter adjustment???

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Gaffrig Shifter adjustment??? (https://www.offshoreonly.com/forums/general-q/83294-gaffrig-shifter-adjustment.html)

two-air

07-15-2004 09:37 AM

Gaffrig Shifter adjustment???

Is there a way to adjust the friction of a gaffrig shifter? I disconected the cable and found that is only binding from neutral to reverse.

pachangalpina

07-15-2004 10:40 AM

Re: Gaffrig Shifter adjustment???

You should be able to adjust it with an allen wrench from the top side. look thru the black rubber boot at the base of the handle for the tension adjusting set screw. It is basically a set screw which presses a nylon pad against the shaft. As the nylon wears, you have to tighten the set screw. The nylon pad can be replaced if it is worn out completely without disassembly of the unit.

tssteph

07-15-2004 01:48 PM

Re: Gaffrig Shifter adjustment???

Is there the same thing for the throttles? Mine seem hard to move, they have been that way since new.

Brian

All times are GMT -5. The time now is 10:23 PM.