Push button ignition switches
 

I want to replace my ignition switches and was wondering if anyone knows if there's a company that makes aftermarket ignition switches that have one key and two push buttons? I've seen them on different stuff but can't seem to find anyone who makes them.

Re: Push button ignition switches
 

Try this . You can do a search on stock car products and look for the ones that cater to the dirt track .they usually do water proof


http://www.speedwaymotors.com/xq/asp...qx/product.htm


http://www.colemanracing.com/section/index.htp?id=256

this is a good company,,,http://www.daymotorsports.com/vendor/6/

These guys have a lot of stuff.high quality,,http://painlessperformance.com/togglecc.htm


here is a company that supply's a lot of Nasscar teams. Expensive$$.http://www.quickcar.net/ign_panels/ign_panels.html

Where the toggle switch is you can change over the a key switch .Make you on panel and paint it .All these company's sale just the parts


Rob

Re: Push button ignition switches
 

There is no reason why you couldn't use the stock key and add two push buttons. Boat US will have the parts you would need. The only getcha is that both engines will shut off at the same time.

Re: Push button ignition switches
 

You'll want separate shutoff switches for each. You can use a single key switch to turn on and off the main 12v bus to the switchgear for theft purposes, but you'll still want separate switches to turn the juice off to each engine's systems.

Either 3 position switches (down is off, center is on, up is start and is springloaded)
Or separate toggle switches for fuel pumps, ignitions and monitoring circuitry plus a pushbutton for the starter.

No real limit. It's just circuits. You can do whatever you want.

Re: Push button ignition switches
 

Thanks for the info guys, I guess i'll have to make my own panel so i get exactly what i want, I didn't even think about seperate kill switches :eek: