Offshoreonly.com - Trim Cylinder Help

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Trim Cylinder Help (https://www.offshoreonly.com/forums/general-q/85335-trim-cylinder-help.html)

Twig111

08-16-2004 06:32 PM

Trim Cylinder Help

I pulled the trim cylinders to replace the hydrolic hoses my bravo I. The aft pivot pin was frozen in the drive - won't move. The forward pin came out with no problem. I assume thats not right (the aft pin locked). Is it OK to run like that or do I need to fix this? I assume it should turn or it will screw up the bushing?
Thanks...Sam

US1 Fountain

08-16-2004 08:02 PM

Re: Trim Cylinder Help

Very little pivoting action at the rear pin.

Twig111

08-17-2004 08:05 AM

Re: Trim Cylinder Help

I see what you mean, most of the pivot on the front. I'll ignore this for now...Thanks US1.

All times are GMT -5. The time now is 07:12 PM.