Offshoreonly.com - 525sc cam specs

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 525sc cam specs (https://www.offshoreonly.com/forums/general-q/86130-525sc-cam-specs.html)

GO4BROKE

08-31-2004 05:51 AM

Re: 525sc cam specs

Actually I've found several spec mistakes in Merc manuals. I use the specs in the "how to build a high performance big block" book.

rmbuilder

08-31-2004 07:56 AM

Re: 525sc cam specs

That is a mis-print in the Merc manual. (I have the same one) The cam from the factory is a Crane 132561/H-228/312-2S-14 T1.2. Specs are on the above cam card.
Bob

Wildchild212

08-31-2004 12:08 PM

Re: 525sc cam specs

Would this cam work with my exhaust under water? If not can I get a cam with a special grind that will work just as good as this one?

Mark

All times are GMT -5. The time now is 01:54 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page