Offshoreonly.com - Custom Electronic Panels

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Custom Electronic Panels (https://www.offshoreonly.com/forums/general-q/86276-custom-electronic-panels.html)

BurningWater

08-31-2004 11:20 PM

Custom Electronic Panels

I'm building a couple new panels out of plexyglass (not lexan). Going to put some lights behind it plus some gear. I have them cut and now I need to form them.

What temperature does it bend at? I have the form setup with the pegs so it will drop in place, but I forget what temp to put it at (and for how long) so if forms in place with all the edges rounded off.

Anyone know?

C_Spray

09-01-2004 10:55 AM

Re: Custom Electronic Panels

Between 270 and 350 degrees F, with 320 being the optimum.

BurningWater

09-01-2004 01:29 PM

Re: Custom Electronic Panels

Thanks!

All times are GMT -5. The time now is 12:21 PM.