![]() |
Water in Hydraulic Oil
I have replace my hydraulic rams end caps and Orings twice and still notice water in my trim pump oil. There is no oil leak from the rams so where is the water coming in from. I have had this problem for a while.
|
Re: Water in Hydraulic Oil
Since you seem sure that it isn't getting in at the seals...
Any chance that rain water drips between a hatch edge near the transom and drops onto the top of the pump or reservoir? I had that once. It stopped when I put a bucket over the top. |
Re: Water in Hydraulic Oil
Check the hoses, that's where mine was.
|
Re: Water in Hydraulic Oil
Originally Posted by cuda
Check the hoses, that's where mine was.
If the water is coming in from the hoses would oil be coming out from it. Thanks Ailina |
Re: Water in Hydraulic Oil
Originally Posted by fund razor
Since you seem sure that it isn't getting in at the seals...
Any chance that rain water drips between a hatch edge near the transom and drops onto the top of the pump or reservoir? I had that once. It stopped when I put a bucket over the top. Thanks Ailina |
Re: Water in Hydraulic Oil
Maybe Cuda is on to something then?
|
| All times are GMT -5. The time now is 11:15 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.