Prop Manufacture ID
 

Would appreciate some imput on the manufacture of my prop...

The following markings are stamped on top of the hub...


HC-CL24L O-IV


THANK YOU!

Re: Prop Manufacture ID
 

It's a Hydromotive Quad IV (4) 24 pitch LH rotation,

Re: Prop Manufacture ID
 

I thought it was a Hydromotive, but wanted to be sure.

If the prop was "lab finished" would it be apparent?


Thanks Again

Re: Prop Manufacture ID
 

If Hydromotive lab finished the prop you would be able to tell. On the can between a couple blades there would be a stamp with a series of letters and numbers. The first two letters would be "HE" followed by a series of numbers.

If another shop worked the prop then it's up to the individual shop as to how they mark a prop. Generally a lab finished prop would have a thin leading edge. It may have either a satin or polish finish.