Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Repairing bolt holes in transom (https://www.offshoreonly.com/forums/general-q/88050-repairing-bolt-holes-transom.html)

Dave M 10-04-2004 07:31 AM

Repairing bolt holes in transom
 
What is the best way to glass over or repair bolt holes in a transom? I'm talking maybe the size of a quarter or half dollar.

Thanks,
Dave M.

502procharger 10-04-2004 02:14 PM

Re: Repairing bolt holes in transom
 
i would also like to know. i might be selling one of my boats with stock power and i need to remove the external steering. i have 4-9/16 holes and 8 -1/4 holes. i was going to just fill them with reson then touch up the gel coat but i dont know what is best. thanks

dlbCheckmate 10-04-2004 02:34 PM

Re: Repairing bolt holes in transom
 
I used wood dowels and 5200, then glass over. But I would wait for an expert to chime in.

Towel Boy 10-04-2004 05:47 PM

Re: Repairing bolt holes in transom
 
in my personal opinion, which is not the easy to do it is gring from both sides until they meet and start glassing, time consuming but worth every penny in my book, a lot more work but will stay together.

HPJunkie 10-05-2004 07:30 AM

Re: Repairing bolt holes in transom
 
dowel it and repair


All times are GMT -5. The time now is 03:52 PM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.