|
Originally Posted by Linster
(Post 2874631)
Been away from this area for a while. Glad to see you are keeping things in order. That is an awesome amount of work you are doing. Thanks for the pictures. I prob ally need to do all that to mine next year.
Thanks Linnie,and are your blower on it yet? I'll send ya some of my extra energy,get after it bro:ernaehrung004: Rob |
Not yet, waiting on seeing Dave's hatch modification. I will need to do the same. Will happen this fall now, unless it keeps raining. Might start in August after all the trips are done. Keep up the good work.
|
Originally Posted by Linster
(Post 2875635)
Not yet, waiting on seeing Dave's hatch modification. I will need to do the same. Will happen this fall now, unless it keeps raining. Might start in August after all the trips are done. Keep up the good work.
[YOUTUBE]http://www.youtube.com/watch?v=W9KsgFjI7ak[/YOUTUBE] |
Sweet.
UD |
Originally Posted by Nordicflame
(Post 2874725)
Hey Linnie, Just stick those new blowers on there and make that hatch fit :drink:
(my hatch is out being modified; I'll shoot you some pics when I pick it up) Randy, Rob's spot on with RM Builder; He will spec grind any cam you want for your application. Again, hopefully you have someone to handle the ECU issue with any changes in cam and heads. The blower has a way of over riding marginal heads :) Go have fun! Also, as far as cryo treating, your guys will be the second in Utah :rolleyes: Dave |
The time has come!
Thanks Rob & everyone else on this post. This site is the best place for advise & experience for us powerboaters. My boat is finally ready to lake test this weekend. Just in time for good weather & rising gas prices. Wide Open Performance came through. Once all the parts arrived, it went very quick & they did an awsome job. Break in this weekend & hammer down for the 4th @ Starvation! If I get close to Robs #'s, should be 85+mph @ my altitude.
|
Originally Posted by 90mphRAGE
(Post 2897744)
Thanks Rob & everyone else on this post. This site is the best place for advise & experience for us powerboaters. My boat is finally ready to lake test this weekend. Just in time for good weather & rising gas prices. Wide Open Performance came through. Once all the parts arrived, it went very quick & they did an awsome job. Break in this weekend & hammer down for the 4th @ Starvation! If I get close to Robs #'s, should be 85+mph @ my altitude.
Up date us Randy????:drink: |
Been burnin up the lakes for a couple months now. 85 gps @ Powell. Minor issue w/ TPS connection. All is good, but now it's about time to put it in storage. Gotta move somewhere warm. Planning desert storm in the spring to see what she'll run at low elev.
|
2 Attachment(s)
Ive had a few people interested in the valve cover fitting.They make it in #12 and 16,The fitting on the inside has holes drilled in it.kinda like a baffle.They list it for vacuum pumps.It makes a nice fitting run the #12 hose to the puke tank.Theres no leaking on the valve cover,no oil residue anywhere.The hole diameter is the same as the grommets and PVC valve hole,that works out good.:drink:
The part # is 22635 Moroso. http://www.moroso.com/catalog/catego...?catcode=13635 <a href="http://videos.streetfire.net/video/Hustler-dyno-pull-911hp_70275.htm"><img src="http://px5.sfstatic.com/thumbs/0000/20/57/70275.jpg"/><br>Hustler dyno pull 911hp 11.5 lbs,Whipple</a> |
The motors look nice Rob !! I like how the fp's & filter mount to the pan that way.. The brackets may be common (?) but for some reason thats the first time I've ever seen that or payed enuff attention but either way I may have to steal that idea..
|
| All times are GMT -5. The time now is 09:33 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.