On The new head studs the short ones look alittle long,shoulder showing, the kit was for a reg bbc,the stud is 4.375.wonder if the nut will bottom out with the washer? I haven't tq them down yet,arp makes one .250 shorter also.I figure the washer is .125

fixx
 

pic V i always remove that plug and loctite it..you never know..

you talking about were the pressure spring is?

fixx
 

yes sir! i have takin some apart in the ast and have fould that some had blue on them and i ran across 2 that did not have any so now i check and do all of them ..

Tickfaw 200 get to work !:evilb:

Less typey more workey:grinser010:

this was in the fuel filter,trying figure out what it is,


http://i19.photobucket.com/albums/b1...psea2ef883.jpg

Ethanol eating the rubber hose?

it would be in the injectors,i only have that one filter,im adding a 5-10 micron filter after the pump,still no water separator,

When Ive seen the rubber deteriot its been chunks,

it looks like black paint, glue and flakes