Offshoreonly.com - Bravo drive length

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Bravo drive length (https://www.offshoreonly.com/forums/general-q/91457-bravo-drive-length.html)

CN24	11-30-2004 04:06 PM

Bravo drive length

Are all the bravo's , 1.X,XZ, and XR the same length (crank shaft to prop shaft) so, for example, if I set my X at 17" and mount a bravo 1 then switch to an XR is my prop at the same height?

Griff

11-30-2004 04:09 PM

Re: Bravo drive length

Yes.

augie58

11-30-2004 08:04 PM

Re: Bravo drive length

are there any alternatives to IMCO to obtain a shorter bravo style drive?

Griff

12-01-2004 12:44 AM

Re: Bravo drive length

Somebody on the board was working on shortening a Bravo lower a while back, but the last I saw it was still in the testing stage. I don't know what happened when it went into testing.
There aren't any other manufacturers other than Imco that I'm aware of.

All times are GMT -5. The time now is 05:01 AM.