Offshoreonly.com - Rhoads hyd. lifters

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Rhoads hyd. lifters (https://www.offshoreonly.com/forums/general-q/91898-rhoads-hyd-lifters.html)

robyw1

12-08-2004 11:39 AM

Re: Rhoads hyd. lifters

Quote:

Originally Posted by Edward R. Cozzi

I seem to remember them causing pressed-in rocker arm studs to pull out once in a while. When we switched back the problem stopped. The noise reminded me of solid lifters.

I don't see how this could be. It is spring pressure & excessive heat that is the most responsible for lifting your press-in studs

Roby

Edward R. Cozzi

12-10-2004 01:26 PM

Re: Rhoads hyd. lifters

Quote:

Originally Posted by robyw1

I don't see how this could be. It is spring pressure & excessive heat that is the most responsible for lifting your press-in studs

Roby

You're probably right. Heads should have screw-in studs anyway.

All times are GMT -5. The time now is 02:02 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page