Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Helping Bravo's Live - Detuning (https://www.offshoreonly.com/forums/general-q/94449-helping-bravos-live-detuning.html)

Attack 01-14-2005 12:10 PM

Helping Bravo's Live - Detuning
 
Is it possible to de-tune my 750 hp motors to reduce peak torque and help the bravos live a little longer? I don't want to spend the $15k - $20k right now to do a respectable bravo upgrades until later this year. I never tried to de-tune motors before. I wonder if setting the timing back would reduce peak torque at 4,000 - 4,500 rpms .. my cruising speed. I don't want to go internal to make changes to the motors. :cool:

Reed Jensen 01-14-2005 12:17 PM

Re: Helping Bravo's Live - Detuning
 
There are two sticks on the dash board..... they are connected to the throttles... move them easily and softly in both directions and you won't have to do anything to the drives................. :D I'm sorry... I don't mean to sound like a smart-a$$.... but sometimes it's not the torque generated by the horsepower that tears stuff up... but the torque from the larger mass of the crankshaft and flywheel twisting the undersized, underengineered parts in the drive. Hard on... hard off... on the throttles can break parts just as quickly as too much HP.

fund razor 01-14-2005 12:31 PM

Re: Helping Bravo's Live - Detuning
 
Am I reading this right???

All these guys spending big money for another 3 hp, and one fish swimming upstream trying to reduce his?

Not trying to be a smart ass either, but it's kind of funny.

Wally 01-14-2005 01:52 PM

Re: Helping Bravo's Live - Detuning
 
if they are blower motors you can put on different pullys to lower the boost......

Attack 01-14-2005 03:29 PM

Re: Helping Bravo's Live - Detuning
 
No blowers.... 600 ci / 750's.

I know the sticks trick ( :cool: ), but would like to see if I can reduce peak torque, which is far over the rated capacity of the drives.

cooltoys61 01-14-2005 03:48 PM

Re: Helping Bravo's Live - Detuning
 
Retard the cam a little,
Add another head gasket to reduce compression,,,
Trade motors with me, they are 450HP and certified NOT to break your drives
or I'll buy you new ones ;)

WETTE VETTE 01-14-2005 04:44 PM

Re: Helping Bravo's Live - Detuning
 
Put some nascar restrictor plates on the motor!! :D

jdnca1 01-14-2005 05:05 PM

Re: Helping Bravo's Live - Detuning
 
Turn the timing down to like 26..... :D

t500hps 01-14-2005 06:35 PM

Re: Helping Bravo's Live - Detuning
 
Drain all the oil before the first spring run......The drive will last longer than the motor!

offthefront 01-14-2005 06:44 PM

Re: Helping Bravo's Live - Detuning
 

Originally Posted by Attack
No blowers.... 600 ci / 750's.

I know the sticks trick ( :cool: ), but would like to see if I can reduce peak torque, which is far over the rated capacity of the drives.


dude .... I'm as green as its gets ....you make no sense ..... just be EZ .....simple ...


All times are GMT -5. The time now is 07:52 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.