![]() |
Which blower system is the best???
Hi!
Just wanted to ask the experts here on the board about what blower would be the best for 496 HO, 500 EFI and 525 EFI?? Look like Gaffrig has a charger which is efficient and easy to mount... Are there any bad sides with these blowers? Why have the 575 SCI and bigger the top mounted blowers, while the add-on ones most often is side mounted? THANK YOU! |
Re: Which blower system is the best???
Gaffrig blower=no innercooler :( ,i dont care what they say,innercooler is a must!!
|
Re: Which blower system is the best???
Gaffirg ???????????????? So when you have a problem with the super charger who are you going to get help from? Not Gaffrig :mad:
|
Re: Which blower system is the best???
WHIPPLE system and customer service for the HP series.
|
Re: Which blower system is the best???
WHIPPLE RULES, NO IF AND OR BUTS..... :evilb:
|
Re: Which blower system is the best???
Ditto on whipple.
|
Re: Which blower system is the best???
Vortech installed by AZ Speed & Marine. They built the programs for Vortech to re-map the computers. Whipples are sanitary as well, if you can find someone experienced to install either one you should be ok. They've both seemed to work out all the bugs associated with the install. I'm partial to AZSM though, they sell both and you see wich one I went with.
Gaffrig who? Didn't they get there name for selling gauges made by Lavorsi? I notice they dont sell them anymore, wonder why.......... |
Re: Which blower system is the best???
In used PROCHARGERS for my 496ho's they are intercooled from the start.Ran them hard all year no complaints here
|
Re: Which blower system is the best???
Are there any problems with stock head gaskets with whipples running 7PSI Boost? If any one has any info on this I would certainly appreciate it.
|
Re: Which blower system is the best???
Originally Posted by VIPER7
Are there any problems with stock head gaskets with whipples running 7PSI Boost? If any one has any info on this I would certainly appreciate it.
Look at the first pick I had a FelPro head gasket starting to blow because the surfaces where no flat , ck out the last page for a pick of the metal head gaskets. http://www.offshoreonly.com/forums/s...&highlight=efi Also do a search ,there some people that posted before they wish they had changes the head gaskets |
| All times are GMT -5. The time now is 05:26 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.