Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   experience with UNI-Top CMI?? (https://www.offshoreonly.com/forums/general-q/95852-experience-uni-top-cmi.html)

The Menace 02-06-2005 07:12 AM

Re: experience with UNI-Top CMI??
 
I am currently getting pricing for a new set of CMI's. I was planning on shipping one set of my Merc's/Gil's to them for hem to copy.

What are you guys finding for lead times?

iamfaster 02-06-2005 09:35 AM

Re: experience with UNI-Top CMI??
 
back to top

iamfaster 02-06-2005 02:18 PM

Re: experience with UNI-Top CMI??
 
Go Pats!!!!!!!!!!!!!!!!1

Griff 02-06-2005 10:41 PM

Re: experience with UNI-Top CMI??
 

Originally Posted by iamfaster
Hey griff, your boat is probable wrapped up for the winter, but would you happen to know the dimension from the crankshaft centerline UP to the CENTER of your thru-hull opening??? I measured from the center of the gimbal pivot up and measured xcross to the center of the thru-hull and I came up with 12 7/8". I was told that you neen 13 7/16" and that you need to be dead on??


Thats difficult measure with it completely assembled, at least to have 100% confidence in my measurement. It would be easy to be a 1/2 inch or more off.
I could measure it from the outside of the boat using and use the transom assembly as a reference. It would be a comparable measurement for you to check.

Griff 02-06-2005 11:06 PM

Re: experience with UNI-Top CMI??
 
I just measured from the OUTSIDE transom assembly.

The CENTER of the tips is 3 3/8 inches above the top of the Bravo transom assembly. The tip CENTERS are 27 3/4 inches apart.

Also, if you are measuring from the crank center line, if you are slightly out of vertical alignment, that could also change your measurement.

jrz 02-07-2005 09:25 AM

Re: experience with UNI-Top CMI??
 
The CMI Unitop water dump is as far back as the standard Bravo tail.

fountain333 02-07-2005 12:17 PM

Re: experience with UNI-Top CMI??
 
iamfaster did you figure out if the uni tops would work ??

iamfaster 02-07-2005 01:26 PM

Re: experience with UNI-Top CMI??
 
will let you know shortly...been on the phone all day with cmi....doesnt look like they will fit.

talk soon

iamfaster 02-07-2005 01:27 PM

Re: experience with UNI-Top CMI??
 
fountain333, do u need both sets??

fountain333 02-07-2005 02:12 PM

Re: experience with UNI-Top CMI??
 
no i just need one set ! call me if you want 734-819-0474


All times are GMT -5. The time now is 08:48 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.