|
Intake Part#
I took my carb off today and found the chevy part number on my intake manifold. PN 333841 I tried to find the number on the internet but failed. Can anyone help identify this intake? Its on a mark IV 454.
|
Re: Intake Part#
dual plane ???
|
Re: Intake Part#
Yes, Dual plane
|
Re: Intake Part#
whatcha wanna know ??
|
Re: Intake Part#
Which chevy intake is it? It does not appear to be a high rise. where can I look up old GM part numbers?
|
Re: Intake Part#
Originally Posted by Hostile Takeover
Which chevy intake is it? It does not appear to be a high rise. where can I look up old GM part numbers?
no , it's not a high rise. good for low end / midrange . nla from gm. part #'s extinct. |
Re: Intake Part#
Open72, you are a man of much knowledge!
Do you know if it has brass inserts in the water passages? Is it a good manifold. I am doing an upgrade to DANA exhaust manifolds and a roller cam. Would you replace it with a high rise? |
Re: Intake Part#
1 Attachment(s)
Originally Posted by Hostile Takeover
Open72, you are a man of much knowledge!
Do you know if it has brass inserts in the water passages? Is it a good manifold. I am doing an upgrade to DANA exhaust manifolds and a roller cam. Would you replace it with a high rise? ya , it has the inserts. i am actually using the same intake with a 2 inch spacer . going on a 540 with a crane 731 roller. what kinda boat/drive? |
Re: Intake Part#
Pretty :drool:
|
Re: Intake Part#
Originally Posted by Gilman
Pretty :drool:
|
| All times are GMT -5. The time now is 04:25 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.