Ford 351 Compression Ratio
Does anyone recognize these pistons? Im trying to figure out my compression ratiio for the new motor Im going to be building. Should I stay with these pistons or go with something else? I may use my old 302 heads.
http://plaza.ufl.edu/dspear/ebaypics/351piston.JPG |
Re: Ford 351 Compression Ratio
This 351 Windsor was originally a marine motor .... has anyone ever seen pistons like this before?
|
Re: Ford 351 Compression Ratio
I just finished putting the heads back on my 1970 Holman Moody 351W (1970 Donzi 18 2+3) this weekend. Mine had the same pistons. My HM plate reads 9.6 to 1 compression ratio. What head castings do you have? Mine were D00E-C's.
Jim |
Re: Ford 351 Compression Ratio
David
351W came with '69-'76 .230 dish & 1.739CH '77-'91 .105 dish & 1.752CH '93-'97 .180 dish & 1.770CH Chamber Volume will set final C/R Richard RCD Racing Engines Let me know if you need info or parts for this engine |
Re: Ford 351 Compression Ratio
It turns out theyre standard 351 pistons
|
All times are GMT -5. The time now is 05:52 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.