Offshoreonly.com - Bravo- engaging while in neutral

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Bravo- engaging while in neutral (https://www.offshoreonly.com/forums/general-q/96177-bravo-engaging-while-neutral.html)

RickR

02-09-2005 02:19 PM

Bravo- engaging while in neutral

Bravo/Quicksilver 3000 Series remote (1995)

Fine at idle but when I push shift lever release button and idle up in neutral (with lever forward) drive engages in forward. :eek:
If I push shift lever release button and idle up toward reverse- no problems.

I've cleaned and greased the detent ball (rear cap of drive) and adjusted shift cables :mad:

Thanks

Ted G

02-09-2005 02:26 PM

Re: Bravo- engaging while in neutral

I think those were recalled for that problem. It is very dangerous and you need to get rid of it ASAP

WILDTHING TAZ

02-13-2005 04:23 PM

Re: Bravo- engaging while in neutral

You Need To Check Shifter Unit. ( Under Hatch) There Is A Plastic Set Gauge Too Set The Throw Disstance Correctley. It's Very Usefull When You Are Guessing At The Setting On The Shifting Unit.

All times are GMT -5. The time now is 09:26 PM.