Offshoreonly.com - Help, need tailpipes for triple engine setup

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Help, need tailpipes for triple engine setup (https://www.offshoreonly.com/forums/general-q/96743-help-need-tailpipes-triple-engine-setup.html)

mcraymond3

02-17-2005 06:36 PM

Help, need tailpipes for triple engine setup

I need tailpipes for the front engine in this Cigarette. The motors that were in the boat were 575's and I have the tailpipes that came with the boat. I put 600 efi Innovations w/ CMI headers and the tailpipes won't work. They are three inches short. Is my only choice to have CMI custom make some tailpipes? Also, used dry exhaust on rear motors. What do you think?
Mat
910-330-1911

WILDTHING TAZ

02-17-2005 08:34 PM

Re: Help, need tailpipes for triple engine setup

If The Pipes You Have Will Work If You Only Extend The Back Of The Pipe 3" I Think I Can Get Them Extended For You. Why Would The Exhaust Change ? The Blocks Are The Same Dimensions Unless You Went To Tall A Deck. Is The Motor Bolted In The Same Location?

All times are GMT -5. The time now is 11:19 PM.