installing offshore mounts
 

Planning on replacing my std merc mounts with offshore mounts.

Does anyone know of a jig that is available for setting up the L brackets and mounts in the boat before engine installation.

Other wise where would I be able to get a plastic block that I could use for setting everything up.

Re: installing offshore mounts
 

i did mine with a plastic block. Just measure to make sure its all even very carefully. when its all lined up clamp everything securly in place and drill the mounting holes. then bolt it in place.

Re: installing offshore mounts
 

Puder where would I get the plastic block from? Is that something Jegs or Summit would carry.

Re: installing offshore mounts
 

Speedway motors has the plastic block:
speedway motors plastic block

Puder, did you do this on a bravo boat? I would think the engine coupler needs to be bolted on so you can use the alignment tool.
DS