Offshoreonly.com - I.D. of seawater pump hose

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - I.D. of seawater pump hose (https://www.offshoreonly.com/forums/general-q/99773-i-d-seawater-pump-hose.html)

509 SC

04-02-2005 09:50 PM

I.D. of seawater pump hose

Hi, Just wondering what the i.d. of the hose from the transom assembly to the seawater pump is? I have a transom flush tee'd into the hose but there isn't a shut-off valve between the tee and the transom assembly. I seem to recall that the hose is 1 1/4" but I'm not sure if that's i.d. Thanks! Steve

Mudball

04-02-2005 09:54 PM

Re: I.D. of seawater pump hose

Standard engine mounted seawater pump and Bravo drive is 1 1/4".

Edward R. Cozzi

04-02-2005 10:12 PM

Re: I.D. of seawater pump hose

Mudball wins!

509 SC

04-02-2005 11:09 PM

Re: I.D. of seawater pump hose

Thanks! That's what I thought :D Steve

Viper31

04-03-2005 11:27 AM

Re: I.D. of seawater pump hose

I seem to recall that the actual stock size is 1 1/8 but most guys just use 1 1/4 hose as it is more readily available.

All times are GMT -5. The time now is 01:22 PM.