Re: Anybody have Coupler Problems?
 

Replaced both of mine as soon as I got the new to me boat home. 125 hrs and 3 yrs, they were about to go anytime. All do to a combonation of no greasing by the original owner and poor engine alignment from the factory. I always pull them 1st thing in spring and check for alignment and grease the u-joints.

Re: Anybody have Coupler Problems?
 

I probably should have included this info. I bought the boat new, and am actually really good at keeping it serviced. It's lubed and the alignment checked twice a year since I use it a lot. The motor is a 350 Mag MPI with a Procharger. I guess it was just my time after 4 years. Thanks for the info guys.

Re: Anybody have Coupler Problems?
 

Mine did the same thing.but there is no engine height ajustment on my 500 efi. with the offshore mounts . The last time I cked it it was ok.still went bad.

So?

Re: Anybody have Coupler Problems?
 

Blew one on the Cafe Racer in 2003.

Maintenance helps as mentioned above.

Re: Anybody have Coupler Problems?
 

Well now that the coupler is out of the way, you only have to worry about your gimbal ring and upper in the next year or 2. :p
Gary

Re: Anybody have Coupler Problems?
 

Thanks a lot Gary! What's next my dog dies and my wife leaves me? I guess we need to write a song about the broken boat parts blues.

Re: Anybody have Coupler Problems?
 

If your mom gets thrown in prison too, you'll have the makings for a good country song. :p

Re: Anybody have Coupler Problems?
 

Any body selling these couplers for under 275.00? (standerd bravo non hp)