Anybody have Coupler Problems?
I hear a lot about people breaking drives (I have too), but this weekend I blew a coupler. The boat was not sitting up all winter, sorry you northern guys. I was just wondering how many of you have had this problem. Thanks for the input.
|
Re: Anybody have Coupler Problems?
I caught a bad one (wear) after I bought my boat.
The teeth were sharp instead of square. Went with the stock replacement. (I am only 260 hp/side) |
Re: Anybody have Coupler Problems?
I've gone through a couple, no pun intended :D. Could be due to engine/drive alignment, high HP, or maybe bad gimble bearing.
|
Re: Anybody have Coupler Problems?
Originally Posted by Pure Energy
Could be due to engine/drive alignment
|
Re: Anybody have Coupler Problems?
Originally Posted by fund razor
Mine was due to bad alignment from the previous owner.
Mine was due to bad alignment from the (ex) engine installer :D |
Re: Anybody have Coupler Problems?
Mine was due to the previous owner NOT EVER charging the grease fittings.
|
Re: Anybody have Coupler Problems?
I'll put this in the Technical Q&A section. Alot of folks lurk that section and could offer some assistance. :cool:
|
Re: Anybody have Coupler Problems?
..
|
Re: Anybody have Coupler Problems?
A Bravo coupler failure? Unheard of!!!!! Just kidding, probably #3 behind blown uppers and loose gimbal rings.
Very common, keep engine aligned and grease it and it will last somewhat longer. Gary |
Re: Anybody have Coupler Problems?
I agree with gary, If you pull the drive once a year check alinment, grease the shaft , change the drive oil your problems will be far and few.
|
All times are GMT -5. The time now is 06:06 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.