Want To See What Leverage Boat Polish Does?
#1
Registered
Thread Starter
Join Date: Mar 2002
Location: racing capitol of the world
Posts: 3,392
Likes: 0
Received 6 Likes
on
3 Posts
Want To See What Leverage Boat Polish Does?
Here Are Pics Of A 1988 24 Baja That Is Sitting At A Dealership Here In Indy. I Was Doing A Demo For This Dealer. This Spot Was Done 2 Months Ago In The Lot. The Boat Side Face South And Get Punished By The Sun. The Date On The Pic Is Wrong I Will Add. It Was Taken This Morning. Leverage Polish Oxidation Remover At It Best On A Worst Case Color.
Mike
Mike
#2
Registered
Join Date: Sep 2007
Location: Gaylord, Mi
Posts: 2,573
Likes: 0
Received 0 Likes
on
0 Posts
Honestly I am not too impressed. I spent a couple hours this summer removing oxidation from my 1987 four winns with my rotory buffer and it looks at least this good if not better.
Maybe the pics dont show the effect as much as in person.
Sorry for the neg post I am just being honest.
Maybe the pics dont show the effect as much as in person.
Sorry for the neg post I am just being honest.
#3
Registered
Join Date: Sep 2006
Location: Closer than you might think..........
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
Hi drPete,
I believe Mike did this by hand with a quick wipe on/off. I agree with the pic that it's kind of hard to see. I'll post some up.
Donnie
I believe Mike did this by hand with a quick wipe on/off. I agree with the pic that it's kind of hard to see. I'll post some up.
Donnie
#4
Registered
Join Date: Sep 2006
Location: Closer than you might think..........
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
Here's a couple more........
The first pic above is a side shot of a SeaRay that I only had to Polish.
The three below that are older 420s that I've buffed back to life then polished.
The newer SeaRay below them had spent quite a bit of time exposed, so oxidation was pretty bad halfway up. Not anything that couldn't be cured with a little elbow.
I think the last one speaks for itself.
The first pic above is a side shot of a SeaRay that I only had to Polish.
The three below that are older 420s that I've buffed back to life then polished.
The newer SeaRay below them had spent quite a bit of time exposed, so oxidation was pretty bad halfway up. Not anything that couldn't be cured with a little elbow.
I think the last one speaks for itself.
#5
Registered
Thread Starter
Join Date: Mar 2002
Location: racing capitol of the world
Posts: 3,392
Likes: 0
Received 6 Likes
on
3 Posts
Honestly I am not too impressed. I spent a couple hours this summer removing oxidation from my 1987 four winns with my rotory buffer and it looks at least this good if not better.
Maybe the pics dont show the effect as much as in person.
Sorry for the neg post I am just being honest.
Maybe the pics dont show the effect as much as in person.
Sorry for the neg post I am just being honest.
#7
Registered
Join Date: Sep 2006
Location: Closer than you might think..........
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
LOL Drpete.
No, I'm not like a seen on TV or buy these four products, start with this then do that, but don't do this.
Leverage Polish is very simple to apply, very easy to maintain and the Shine speaks for itself. I made the Oxidation Remover to be your one step cleaner before you polish. It will work as your hull cleaner, black streak remover, transom, oxidation of course and any other imperfections.
I've also made sizes just for those who want to give it a try first. If you visit my website you will see that I offer my Polish, Metal Serum & Oxidation Remover in sample sizes for 4.95.
Let me know if you need anything. I also have a lot of threads in the Fiberglass/Paint section.
Thanks, Donnie
No, I'm not like a seen on TV or buy these four products, start with this then do that, but don't do this.
Leverage Polish is very simple to apply, very easy to maintain and the Shine speaks for itself. I made the Oxidation Remover to be your one step cleaner before you polish. It will work as your hull cleaner, black streak remover, transom, oxidation of course and any other imperfections.
I've also made sizes just for those who want to give it a try first. If you visit my website you will see that I offer my Polish, Metal Serum & Oxidation Remover in sample sizes for 4.95.
Let me know if you need anything. I also have a lot of threads in the Fiberglass/Paint section.
Thanks, Donnie
#8
Registered
Thread Starter
Join Date: Mar 2002
Location: racing capitol of the world
Posts: 3,392
Likes: 0
Received 6 Likes
on
3 Posts
i left this facing the sun for 1.5 months. now what do you think?
this is the real deal. we were too. i have demoed different bottles at every dealer just to sell myself on the stuff. it worked on my 73 sl450 benz with original paint too. looks like new for the last 4 months
mike stancombe
this is the real deal. we were too. i have demoed different bottles at every dealer just to sell myself on the stuff. it worked on my 73 sl450 benz with original paint too. looks like new for the last 4 months
mike stancombe
#9
Platinum Member
Platinum Member
I just wish Trick Marine would send me mine. I only ordered it 5 months ago. It could be the greatest thing in the world for all I know ................
If someone wants to make it right, feel free to give me a call.
Clark
713-540-0171
If someone wants to make it right, feel free to give me a call.
Clark
713-540-0171
Last edited by crb76; 09-24-2007 at 09:17 PM.
#10
Charter Member#203
Charter Member
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,396
Received 14,645 Likes
on
3,773 Posts
The stuff all works great, If your having problems recieving your product , send Donnie a PM see if he can help you directly.