Re: This Weekend @ Grand
 

cool, I've got to help out the 0rtho in Grove friday, will be up all weekend.

Re: This Weekend @ Grand
 

Grand is the place to be.
(Excedpt for Brad :eek: he needs to be in Joplin) :drink: :D
:evilb:

Re: This Weekend @ Grand
 

Come on Big E, I just need him for a hour or two!Need help tracing down a EFI problem, the box didnt show any problems when hooked to the computure, think it could be on the crank trigger, bad connection, ground etc.I have to be in Edmond for the state gymnastics meet all next weekend

Re: This Weekend @ Grand
 

Are you sure you don't want to ride in a truck to Pic Wick after that :eek: :drink:

Re: This Weekend @ Grand
 

Wish I would have known that, I would have sold you my lift. :( It may have been overkill, but always room to move up :D

Re: This Weekend @ Grand
 

Yeah that sounds like fun! How about riding in a dump truck, that would be fun?! :eek:

Re: This Weekend @ Grand
 

I worked on some Eickert injected engines at Lipship last year.I disconnected all the plugs on the harness and put dialectric grease on all the pins and plugged them back in.It ran perfect after that.It turned out to be the crank trigger plug.It was crusty.

Re: This Weekend @ Grand
 

Warparty, how much for the Lift. I just got home with my 357. Just have to wait for Gary to get me a slip large enough...I seemed to have picked up a few strays while passig through Waco

Re: This Weekend @ Grand
 

JC thinks for the advice, Eickert has been a lot of help over the phone, you and he think a like , he had told us to check all connections andgrease, to also check all grounds, he also thought the crank trigger or throttle position sensor were likely the problem, Brad also thinks crank trigger, hope to get time to check all this out this weekend, once again I apperciate the advice!

Re: This Weekend @ Grand
 

Give me a shout this weekend. We will be down Friday night. PM me and I will give you my # if you want to go run the 29's.