Offshoreonly.com
Page 8 of 13
« First
6
7
8
9
10
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Great Lakes and Canada (https://www.offshoreonly.com/forums/great-lakes-canada-219/)
-   -   Hot Boat at Hardy (https://www.offshoreonly.com/forums/great-lakes-canada/193555-hot-boat-hardy.html)

twin whackas 09-02-2008 03:56 PM
Yep, that was me and Magic Medicine. The formula sure made for a nice booze cruiser :drink:

Magic Medicine 09-02-2008 04:16 PM
Originally Posted by MidnightRider (Post 2671952)
Whaka- I think it was us bench raicng under the pavilion in the rain last year? We went for the damp ride on the Formula. MR
I remember that, it was fun:ernaehrung004:

Todd Hartigh 09-03-2008 01:04 AM
MR, kristi is coming up with katie on fri. Jason is bringing the panther as long as he figures out a valve lash problem. Valeko is suppose to be going, I think jason said if the boat don't run he was going to ride with him.

Retired? I worked hard getting the boat ready:grinser010: I will be plenty busy nest week since winterize season starts.

See you all up there, and MR, get your rig going!!!

teamsynergy 09-03-2008 05:49 AM
I have been in touch with Becca and she has given me the info I needed. We plan on being there saturday early am and will stay till 4ish....

Originally Posted by Magic Medicine (Post 2671752)
No prob. It was good to put a name with a face. What do you need to know about Hardy? Let me know and i will point you in the right direction.

Rookie 09-03-2008 07:39 AM
Originally Posted by Todd Hartigh (Post 2672628)
Jason is bringing the panther as long as he figures out a valve lash problem. Valeko is suppose to be going,
I think I have the valve train problem figured out. My rocker arm geometry is off on 2 valves. I need to bend 2 pushrod guide plates so my rollers ride in the middle of my valves. I had to do this to 3 of them on my other engine but when I torqued down the guide plates on this engine I did not see any problems. I will have this issued resolved tonight (hopefully) and trial maybe Friday morning. If it doesn't work out the Panther will go in storage for the winter.

JimV (Valako) did say he was going up to Party on the Pond but I don't know who he is going with. (not me that I know of, he hangs out with those BIG POWER guys)

If all goes according to plan I will be up Friday, if not I have no clue.

Jason

Todd Hartigh 09-03-2008 08:16 AM
Rook, If something does not go right let me know! We always have room for ya bro.

MidnightRider 09-03-2008 10:16 AM
Big Power Guys - We like to hang together !:drink:

twin whackas 09-03-2008 10:47 AM
I guess since I only have little outboards, I will hang with the little power guys :ernaehrung004:

Rookie 09-03-2008 11:44 AM
Originally Posted by twin whackas (Post 2672942)
I guess since I only have little outboards, I will hang with the little power guys :ernaehrung004:
(Profile 280 Cat with Twin 300)

Let me correct myself, He will be hanging with you FAST guys. :cool-smiley-027:

Dreamer1q 09-03-2008 12:08 PM
Going to be there Friday afternoon, and in the cove at the ass crack of dawn Saturday.

I have the boxing ring all set too. Floating living room floor, and inflatable boxing gloves. Just hope the weather cooperates enough to use it. nothing like drunks in bikinis falling off a floating materess.

Thats good times for sure!


All times are GMT -5. The time now is 12:19 AM.
Page 8 of 13
« First
6
7
8
9
10
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.