Looking for Good Vinyl Work (Cockpit)
#1
Registered
Thread Starter
Looking for Good Vinyl Work (Cockpit)
I have a 2003 Velocity 260 that needs a complete cockpit vinyl rework including engine cover/sundeck. All panels are plastic, not wood and all foam is in perfect shape. I purchased the boat as a repo that was left in Vegas sun, so the vinyl lost all color. All of the vinyl is intact and un ripped but looks like $hit. Anyway I have complete interior removed from the boat an looking for a reliable person to do the work. I have been quoted $3500 from a shop down the road. I have no idea if that is high, low, or spot on..... My requirement is, all work obviously must be high quality, but also need to replicate the factory set up exactly. I am located in the Downriver MI area (Wyandotte to be exact). Anyone know of some shops or privaters that are local and do excellent work?
#2
VIP Member
VIP Member
only place to go is XT Innovations in Bucyrus Ohio if you want it done right and they are only a few hours from you Ed 419-721-1778
__________________
www.bajaboatowners.com
www.bajaboatowners.com
#3
Registered
Join Date: Jul 2009
Location: Grosse Pointe Farms, MI
Posts: 1,570
Likes: 0
Received 2 Likes
on
2 Posts
I have a 2003 Velocity 260 that needs a complete cockpit vinyl rework including engine cover/sundeck. All panels are plastic, not wood and all foam is in perfect shape. I purchased the boat as a repo that was left in Vegas sun, so the vinyl lost all color. All of the vinyl is intact and un ripped but looks like $hit. Anyway I have complete interior removed from the boat an looking for a reliable person to do the work. I have been quoted $3500 from a shop down the road. I have no idea if that is high, low, or spot on..... My requirement is, all work obviously must be high quality, but also need to replicate the factory set up exactly. I am located in the Downriver MI area (Wyandotte to be exact). Anyone know of some shops or privaters that are local and do excellent work?
May want to post the idea in the boating on a budget forum if you're interested in it.
#5
Registered
Copycat covers in florida. I used them for 1 panel that got screwed up on my boat. you send them the skin and they copy it. i was happy with the results and the price however like anything else, i have read some bad stories about the place in other forums here. i would use them again.
#7
Registered
Thread Starter
I don't think shipping an entire interior back to the factory would be very cost effective.......
I sent XT an email this evening with the link below. Hopefully they can give me a ballpark price based on the pics and measurements I took.
http://site.activesportsunglasses.co...rior_work.html
http://site.activesportsunglasses.co...rior_work.html
Last edited by low_psi; 12-05-2010 at 10:53 PM.
#10
Registered
Thread Starter
I ended up going with a local guy. XT offered a very competative price, actually exactly what my local guy and another shop quoted. XT even offered to pick up the parts from me while they had a driver in town. I just prefer when possible to keep my money local......