Htm Owmers In Kansas
02-11-2003 | 05:36 PM
#11
Thread Starter
Registered
Joined: Jan 2003
Posts: 16
Likes: 0
From: LAWRENCE KANSAS
KCHB........YOU BET. JUST WAITING ON THE WEATHER TO BREAK AND THE SUN TO COME OUT. ANY LUCK ON SELLING YOUR BOAT?I WOULD THINK YOU SHOULD HAVE NO PROBLEM SELLING IT. IT IS AN AWSOME BOAT.TRADE CENTER BOAT SHOW ANYONE..........?
02-20-2003 | 09:24 PM
#13
Registered
Joined: Oct 2000
Posts: 653
Likes: 0
From: Simpsonville, SC 29680
How many banks can I hit to get a 30 footer?
Would luv to have one and probably have one in the next 5 to 7 yrs at the most. With crossed fingers. 
I did my glove box a little different. I wasn't too impressed with the glove box that HTM came up with. Nothing major but this is what I did. When HTM made my boat I had them not to cut the hole for the box. Instead I had them to make a removeable door on the inside of the cabin. Good ole velcro to hold it on. I also had a grab handle put were the box would have been. I don't have a grab handle on the side for the passenger. By not having the handle on the side it left me more room to put the speaker their.
I did my glove box a little different. I wasn't too impressed with the glove box that HTM came up with. Nothing major but this is what I did. When HTM made my boat I had them not to cut the hole for the box. Instead I had them to make a removeable door on the inside of the cabin. Good ole velcro to hold it on. I also had a grab handle put were the box would have been. I don't have a grab handle on the side for the passenger. By not having the handle on the side it left me more room to put the speaker their.
