Offshoreonly.com - Trailer Issues!!!

Quote:

Originally Posted by Elite Marine (Post 2879601)

After further evaluation, its not the bunks that chipped the gel. The top bolts in the bunks are too high and the boat rubs on the them when you pull the boat on the trailer!!

I need to relocate them to the lower hole and still redesign the bunks like your trailers. I would love to buy a new triler, but cant do it right now.

Thanks for all the pictures and info. More than enough info to get this better than it is!

most of the chips on the edges are air voids, they get bigger when ya repair them,Im finding out now$$$$.Its like when they bult the hull , they didnt push the figerglass and resin in to all the edges of the mold. youll find out the sides of the strakes are THIN and most of the material is in the bottom of the strakes,flat spots,When we were blocking the bottom in the sea strainer area on the outside bottom a small air void turned in to a 4in x15in:(