Re: 2000 50' unrigged poker run
 

Lightspeed,
If it is the same hustler thats alot of work switching it from a 4 engine to a 2 engine boat!!! Any pics??

Re: 2000 50' unrigged poker run
 

Its Not That Bad Of a job. Transom All Done already Just starting to Rigg bilge. Fuel system Done. Holes are Cut For The #6s water system Almost done .Waiting For the Gimbels to Come In Then i will make All the mounts for the Engines . ill Post some pictures So You Can see the progress

Re: 2000 50' unrigged poker run
 

So it was a 4 engine boat ?:eek:

Re: 2000 50' unrigged poker run
 

that boat was to be a 4 engine boat when i was at the faxtory in 99 or 2000
i don't know if that boat ever was finished
never saw it after that , anywhere
i have some pictures of it
the boat was sold and the person backed out ... :rolleyes:
what ever happened to it ?

Re: 2000 50' unrigged poker run
 

falcon is out from what i here

Re: 2000 50' unrigged poker run
 

if they are JC's motors the other two are just spares.... :D

Re: 2000 50' unrigged poker run
 

Down, but not out! I just spoke with Jimmy the other day. Yes, he is out of his shop but setting up a temparary shop. New facility is in the works.

Re: 2000 50' unrigged poker run
 

Sorry to hear about Falcon. Jim, Joe and Will are a top notch bunch of guys who did excellent work on my boat for many years. I wish them all well and success in building the new shop.

Cheers,

Chris

Re: 2000 50' unrigged poker run
 

You talking about Falcon the person on this board???

Re: 2000 50' unrigged poker run
 

I was wondering where that got to. As I remember, that was a boat show boat that was never rigged...aside from gauges, throttles etc. A guy from NY who had a Larry Smith Scarab bought it and wanted the shop I used to work at to rig it with a big set of twins...but it never panned out. I do remember Falcon had his Scarab listed for sale while the Hustler just continued to sit. It's a Zero hour boat. If I remember, it had a half cabin and had all sorts of potential. Just needs everything mechanical and I think some plumbing for the cabin fixtures. Hope that helps.