new 41 Center Console mold
 

Here's the new hull mold just about completed. Plug comes out tomorrow. Can't wait.

Better pic

More progress.

love the progress..keep it coming..is there 2 small steps in there

I WOULD THINK SO IT'S 38 PP MOLD STRETCHED.
THAT GOING TO BE ONE BAD A$$ BOAT :)
GOOD LUCK, LOOK'S GREAT SO FAR
MIKE

Yes two steps. Lot's of top secret stuff happening daily at our shop. We're busy and in the process of moving into our new shop. Tooling takes time and we're doing it right. The deck plug is in progress. I can tell you that we're hanging a bunch of these off the back.

Were's the new shop?

How many 350's can you hang off the back..:cool-smiley-011:

and that 38 PP bottom is an excellent place to start..very cool.

Lookin Good B !!!

...

Order mine with 4 300 Suzuki's. Thanks Jeff

What's going on? I stopped in about a week or 2 ago at the shop. I guess David was at lunch or something, his truck was there and the gate was open.

Anyway, hope all is well, was kind of hoping to see the big boat.

Let me know if you guys need some help.

Mike

Hollis what is the latest?!?!?! Weather in Florida is warm...pop that boat rig it and bring it!

Just about done! It will be worth the wait!

Ya..Ive noticed no pics over the last 3 weeks..LOL

Hopefully it will be faster than the new Bahama 41 CC that Henley built. The boat runs 55 with triple 300's...........that sounds exciting....NOT!

That 41 Bahama is awesome..one of the nicest finished off boats I polished..even the bait and storage wells were glassed perfectly..rigging was an art to see...Its a totally different boat..11' beam..11500..over 400 gals of fuel..its a fishermans dream..The 41 Joker to me will be a hybrid.. across between both..looking forward to the finshished product. So far so good.:grinser010:

Any updates Brian - pics, etc...?

I was there friday and will say the detail going into this boat is unbelievable. The bilge area on an outboard has a liner for storage and beneath that is another liner for trim pumps and rigging. The boat is equipped with large tubes for wiring and plumbing to every location. The cabin door is large enough for 2 people to sit in side by side. The fuel tank is mounted on rubber cushions to prevent rubbing through the tank or the hull and then encapsulated. I have never seen a better fit of a hull and deck joint before either.

This boat is going to be bad!!!

Thanks Beau! I'll have some pictures soon. We've had 2 people working 50 hours a week non-stop!

Cool - look forward to seeing the results Brian!

how's it coming Brian...

Brian they need photos!

Ok Brian. The Lauderdale show is here. Can we see pics?

Patience grasshopper....:grinser010: it is better from a manufacture's point of view to have the first boat completely finished, and dialed in before the public see's it first hand.... first impressions are everything. Brian and his team have spent countless hours turning this special SUB CC into one of a kind vessel that is unique, and will be very different then the norm.. Miami looks very realistic..

Brian,

any updates? Can't wait to see finished product.

Boat and molds are done...rigging to start soon!

LOOK'S LIKE A CLOSED DECK :) NOT CC ?

Its a CC with a 17 foot cabin

nice best of both world's :)

This boat is more of a go fast CC with a big nice cabin but you can still do some fishing and diving from it....best of all the worlds!

Thanks for the compliments.........those of you that know me understand that I don't cut corners on anything I do. The boat will be rigged in just a few months. It is truly going to be something special!

hurry up and get that boat done ....so the 38 can start..:grinser010:

I agree!

Nice
 

Looking nice!