A few ?'s
#1
Registered User
Gold Member
Thread Starter
Join Date: Jul 2011
Location: East Aurora, NY
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
A few ?'s
What coring is used in Kryptonites?
What is the beam of the 27/29's
Also What are some speeds with diff size enges? 500,600,700hp etc
Lastly do they have a website?
Thanks,
RJ
What is the beam of the 27/29's
Also What are some speeds with diff size enges? 500,600,700hp etc
Lastly do they have a website?
Thanks,
RJ
#3
coring is balsa and some had some nidacore in places....Transoms are Okume Plywood....
beam is 8ft
speeds are all dependant on setup and drive but with a good running 525 they run in the 80s with 850 around 100+...Johnny saris may be able to answer the HP to speed numbers better
as for a website since they have been out of business for almost 10 years now there is no longer a website....
beam is 8ft
speeds are all dependant on setup and drive but with a good running 525 they run in the 80s with 850 around 100+...Johnny saris may be able to answer the HP to speed numbers better
as for a website since they have been out of business for almost 10 years now there is no longer a website....
#5
Platinum Member
Platinum Member
With 550 HP, Imco box and Teague Drive, mine ran consistent low 80's.
Marty who owns it now had Tyler Crocket build it up to somewhere close to 800HP and he saw upper 90's.
Awesome running boats, becomes a driver's boat when you wring out the last few MPH but ran like a much larger boat through the slop.
Marty who owns it now had Tyler Crocket build it up to somewhere close to 800HP and he saw upper 90's.
Awesome running boats, becomes a driver's boat when you wring out the last few MPH but ran like a much larger boat through the slop.