|
Dash Material
What about the sticky back vinyl material that had all kinds of designs on them,wood was one of many.Just re-wrap it with new sticky back,it was called contact paper and was available any any hardware and paint store. Bud
|
Originally Posted by JPrusinows
(Post 3695193)
Anyone found a replacement or substitute for the wood grain dash material used for the Magnum's? It is an engravable material for sure as the logo is actually engraved in. Would like to find the originalmaterial of course. Any help?
Thanks, Jeff With my 27 Sport Rebuild I have bought a Quarter Sewn piece of Teak about 3/8" thick. This was then bonded to a piece of marine ply in order to provide both stiffness and stability. We cut all of the instrument holes then applied 5 coats of Algrip clear varnish starting at 2:1 reducer up to no reducer, sanding down each coat in tern. I am currently waiting for my local Vinyl shop to cut me a Magnum Marine Logo in the full colours which once applied will then be varnished over with at least two more coats. The result to date is stunning with high gloss real wood which is well protected. Pictures soon - when it`s finished. Ian |
| All times are GMT -5. The time now is 10:03 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.