|
Originally Posted by scippy
(Post 4039982)
It's definately best to prime the tanks with aluminum primer and then finish with cold tar epoxy.
I know it's an extra process, but it does protect the tanks indefinately as opposed to a bare tank. I prepped the tanks first by lightly sanding to scoff them up abit to give the aluminum primer something to bit to.....then washed clean. next day rolled on the cold tar epoxy. A side note: Cold tar epoxy is a "real" thick tar........I found to make it a paintable substance you have to warm it up abit..................I placed the gallon container of tar epoxy in a bucket of almost boiling water and stirred it.........otherwise it's impossible!! [ATTACH=CONFIG]514013[/ATTACH][ATTACH=CONFIG]514014[/ATTACH][ATTACH=CONFIG]514015[/ATTACH] |
1 Attachment(s)
Bulk heads glassed in and tanks pulled making progress[ATTACH=CONFIG]514052[/ATTACH]
|
1 Attachment(s)
[ATTACH=CONFIG]514053[/ATTACH]
|
1 Attachment(s)
[ATTACH=CONFIG]514054[/ATTACH]
|
Have to turn your head have to figure out damn I pad camera. Lol
|
Pics are getting better .......another 1/4 turn and your there!
|
Pulled floor up and had a glass friend look her over today. 41 years old and solid!!! Lucked out and picked up a good one! Amazing
|
I would say post a picture, but I am seasick from looking at your others. Have you mastered the camera yet?
|
Originally Posted by Drake22.250
(Post 4044546)
Pulled floor up and had a glass friend look her over today. 41 years old and solid!!! Lucked out and picked up a good one! Amazing
|
1 Attachment(s)
Katanna lmao, 13yr old showed me how to work dam I pad. Test shot[ATTACH=CONFIG]514800[/ATTACH] will be back working on boat this weekend. Post some then.
|
| All times are GMT -5. The time now is 01:51 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.