|
Originally Posted by Drake22.250
(Post 4082091)
[ATTACH=CONFIG]519421[/ATTACH]
So instead of doing a quick fix and possibly leaking again. DJ at Kehrig manufacturing made these new ones for me. Still gonna prime and cold epoxy coat them. Thanks for the com |
Yes, old tanks failed pressure test. Too many patches for me. Mark do you need any Volvo 280 drives? Cheap
|
Originally Posted by Drake22.250
(Post 4082234)
Yes, old tanks failed pressure test. Too many patches for me. Mark do you need any Volvo 280 drives? Cheap
|
Mr Cig do you have any information on the history of this mag?
|
2 Attachment(s)
[ATTACH=CONFIG]519811[/ATTACH]
Tanks primed and coated with epoxy. Ready to install this weekend. |
3 Attachment(s)
[ATTACH=CONFIG]519964[/ATTACH][ATTACH=CONFIG]519965[/ATTACH][ATTACH=CONFIG]519966[/ATTACH]
Made some more progress this week. Stringers glassed back in. |
2 Attachment(s)
[ATTACH=CONFIG]519967[/ATTACH][ATTACH=CONFIG]519968[/ATTACH]
Glassed outer transom in waiting to dry, then hours of sanding. |
Originally Posted by Drake22.250
(Post 4083112)
Mr Cig do you have any information on the history of this mag?
Mark |
Yep sanded plenty of purple off the transom this weekend. Now it makes some sense that it had four tanks before.
|
3 Attachment(s)
[ATTACH=CONFIG]520345[/ATTACH][ATTACH=CONFIG]520346[/ATTACH][ATTACH=CONFIG]520347[/ATTACH]
Ground everything down last week under cockpit floor and bilge area. Mother Nature gave us opportunity to gel coat. Waiting to dry. |
| All times are GMT -5. The time now is 09:23 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.