"So what's new around here?"....
Low point of winter has me reading trailer accessories....really???......any Magnum pulse out there?
|
Mine's in the freezer 'til spring.
Jeff |
----Short Circuits batteries are on trickle. Does that get you charged up? Me either!......Bill S
|
mine are warm and toasty, ill be staring at them today, gotta make some room for h2O ,
every good museum needs a curator and tour guide |
The best in the business!
"And over here we have a Wolverine motor mount, it was casted at Pete Smith's shop up the road." "What's this over here, Mark?" "Oh, that's my rum and Coke. Why don't you hand that to me." |
A new Magnum 70 is currently being built up in North Carolina by Jim Gardnier.
|
Originally Posted by ironhead
(Post 4521864)
mine are warm and toasty, ill be staring at them today, gotta make some room for h2O ,
every good museum needs a curator and tour guide |
2 Attachment(s)
[ATTACH=CONFIG]564041[/ATTACH][ATTACH=CONFIG]564042[/ATTACH]
After coming to a year stop on my Magnum, Glass Dave is taking on the job to fix blems in bottom and regelcoat to the rub rail. Moving in a forward motion again... |
1 Attachment(s)
Originally Posted by Drake22.250
(Post 4522095)
[ATTACH=CONFIG]564041[/ATTACH][ATTACH=CONFIG]564042[/ATTACH]
After coming to a year stop on my Magnum, Glass Dave is taking on the job to fix blems in bottom and regelcoat to the rub rail. Moving in a forward motion again... |
Thanks Mark, wife might use it as a coffin me some day... This one is a keeper.
|
Originally Posted by Drake22.250
(Post 4522095)
[ATTACH=CONFIG]564041[/ATTACH][ATTACH=CONFIG]564042[/ATTACH]
After coming to a year stop on my Magnum, Glass Dave is taking on the job to fix blems in bottom and regelcoat to the rub rail. Moving in a forward motion again... |
Dave is going to take the hook out of one side and take the nasty awlgrip that was applied on bottom. Patch and repair where needed. Bottom looks to be in decent shape and fill the docking light holes in. Hope to have together by old school reunion 2018. Have the tow rig for the magnum almost complete too, 1973 F 250 highboy. Aka too many projects at once I am told.
|
Mayhem is in West palm for the winter. After my failed attempt to make it down to KW in Nov with the Midnight due to lack of lower units I trailered the Mag down instead. Thought I was having the reserve tank replaced after discovering fuel in the bilge but it appears to pressure test ok so now the culprit appears to be the stb. main tank. Good news is I didn't damage the reserve tank when beginning the job of removal and the main tanks are much easier to access. Annoying part is I replaced this tank 5 years ago... Had a fun run in the ocean from PB inlet to Jupiter inlet before she went to the shop. Heres a short vid from a run in the fall.
Ooops, says the file is too large, whats the trick to posting videos? |
Marshall was the tank that failed fabricated by Alloy?.................in any case, 5 years is too soon.
|
It appears to be the case, yes, and its 1,000mi away so I can't even make him fix it !
|
New Power down here in Mississippi
6 Attachment(s)
Hey Guys! Hope everyone is doing well and in good health!
Took advantage of the mild winter here in Mississippi to rebuild the engines and add some stainless headers. Started the first one today, number 2 tomorrow. Also did some wiring, fixed hynautic steering leak, lift cylinder rebuild, new props and hub kits, etc. etc. Never ends! Jeff and Dennis [ATTACH=CONFIG]565267[/ATTACH][ATTACH=CONFIG]565268[/ATTACH][ATTACH=CONFIG]565269[/ATTACH][ATTACH=CONFIG]565270[/ATTACH][ATTACH=CONFIG]565271[/ATTACH][ATTACH=CONFIG]565273[/ATTACH] |
Hello everyone
This winter I landed my Starfire engines for a leak at the water pump and a revision to the starters I made the units MAY now develop 8.2 remap 445 hp |
Got them running!
Finally got the engines running, hopefully in time for a spring launch!
Came in at 380 HP each and 400 torque. Engines were 1 HP apart and zero difference in torque on the dyno. See links below. https://www.youtube.com/watch?v=xOOg...ature=youtu.be https://www.youtube.com/watch?v=7UjDjWDPG58 https://www.youtube.com/watch?v=CHLLlbLLj9o Keep you posted on speeds once splashed. 270T will hold me back some but still operate beautifully so they stay. Jeff |
the 29-9 finally coming home.....
The 29-9 will be coming to Il.in April.on the dyno it made 610 hp @6,000 rpm 427 now 496 cub.in.
|
Hey Bud, that power should make that boat haul!....race layup, right?.......post some pics!
|
Something different
Let's see if I can upload some images
|
Here you go
http://s1079.photobucket.com/user/ON...?page=1&sort=1 <iframe width="480" height="360" src="http://s1079.photobucket.com/user/ONE-DESIGN/embed/story"></iframe> |
All times are GMT -5. The time now is 05:42 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.