Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Members On-line Video Section!! (https://www.offshoreonly.com/forums/members-line-video-section-158/)
-   -   Ilmor 710 "singing" (https://www.offshoreonly.com/forums/members-line-video-section/200655-ilmor-710-singing.html)

Uncle Dave 12-26-2008 10:16 PM

Ilmor 710 "singing"
 
1 Attachment(s)
Heres a short clip of my first ride in my new LaveyCraft 2750 .

Were at Elsinore doing a test hop before we head out to bigger water.

We were spinning a labbed 28 about 6K in this clip.

You can hear that Ilmor 710 pretty well from 24 seconds on


Uncle Dave

Laveycraft 2750 - 710 Ilmor
Laveycraft 20.8 Sebring 406/ITS

Bob280Silencer 12-26-2008 11:40 PM

A 28 at 6K!! Impressive. What mph is that?

Uncle Dave 12-26-2008 11:49 PM

Thanks
 

Originally Posted by Bob280Silencer (Post 2765833)
A 28 at 6K!! Impressive. What mph is that?

90 off a handheld gps.

I didnt play around with the built in gps enough to get the speed screen up, or even set it up at all.

Uncle Dave

Laveycraft 2750 - 710 Ilmor
Laveycraft 20.8 Sebring 406/ITS

007joe 12-27-2008 07:19 PM

congrats! :drink:
Sounds sweet!

Southocg 12-30-2008 05:36 PM

I wasn't able to open the vid.... but had a question.

What drive are you running and do you know what your X dimension is? Spacers? Shortie?

Thanx

Uncle Dave 12-30-2008 10:35 PM

hmmm
 

Originally Posted by Southocg (Post 2767734)
I wasn't able to open the vid.... but had a question.

What drive are you running and do you know what your X dimension is? Spacers? Shortie?

Thanx


Hmm its a standard quicktime file should open - sorry.

Drive is a Teague platinum. Teague uses an imco lower which is a bit better hydrodynamically than a sportmaster lower. (I lost 4MPH on my tunnel when I went to a sportmaster)

It has an ITS instead of external hydraulic steering which "acts" as about a 2 inch spacer.

Dont know the X dim, but its up there enough to completely blow the prop out

You can look at comprehensive picts of the entire build in the Laveycraft forum under "out of the mold Im blown away" and under the Ilmor 710 thread.

Uncle Dave

Uncle Dave 12-31-2008 12:54 AM

looks like
 

Originally Posted by Southocg (Post 2767734)
I wasn't able to open the vid.... but had a question.

What drive are you running and do you know what your X dimension is? Spacers? Shortie?

Thanx


Looks like OSO turns everything into a .mov no matter what you upload,
I can email the file directly to a different address if you like. Its a short clip.

What I didnt finish typing was that the x dim seems high, and if you just "fathand" the stick out of the hole it'll blow out even a 5 blade 28.

Its certainly nothing unmanageable, but I wouldn't loan it to a "bayliner" guy without letting him get some seat time.

The nordic guys like their heats congratulations

Id like a ride in your rig some day. DO you have picts?


Uncle Dave

Laveycraft 2750 - 710 Ilmor
Laveycraft 20.8 Sebring 406/ITS

ILMORdude 12-31-2008 02:01 AM

.........sounds like a fun boat!

ILMORdude 01-01-2009 05:32 PM

Nice, The vid worked for me this time. Hope you enjoy it!!!!
Sounds great!

Uncle Dave 01-02-2009 06:31 PM

Thanks Ilmordude
 
2 Attachment(s)

Originally Posted by Southocg (Post 2767734)
I wasn't able to open the vid.... but had a question.

What drive are you running and do you know what your X dimension is? Spacers? Shortie?

Thanx

Southocg- Heres a pict of my setup you can see the extension- its probably longer than the 2" I called out earlier.




Uncle Dave


All times are GMT -5. The time now is 08:22 PM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.