2 Hillbilly's changing Valve springs in HP500
03-12-2010, 10:23 AM
#1
Registered
Thread Starter
Join Date: Dec 2008
Location: Detroit, MI/Lake Havasu, AZ
Posts: 729
Likes: 0
Received 1 Like
on
1 Post
2 Hillbilly's changing Valve springs in HP500
Changing my valve springs last night, I decided to make a little funny video while we were doing them! Kinda corny, but ya know, it adds a little excitement to it!
PS. For those that will notice, these were repeats and the seals were already changed, and the springs shimmed to correct install height!
Enjoy if you can.
http://www.youtube.com/watch?v=aTUadxJFbFQ
PS. For those that will notice, these were repeats and the seals were already changed, and the springs shimmed to correct install height!
Enjoy if you can.
http://www.youtube.com/watch?v=aTUadxJFbFQ
Last edited by SmurfOnABoat; 03-12-2010 at 10:25 AM.
Gold Member
