Well I ended up at Bergers marina, very good professional crew there! They found a bad o ring on the Outdrive mount, but when they opened my hatch and didn't find a 100% Merc setup, they were a lil lost.

Last weekend at Bull Shoals lake my boat was stolen and taken for a midnight cruise that ended w my boat up on a rocky point. My hull has no holes but has deep gouges into the glass, my Outdrive and prop are pretty much trashed. My last Outdrive was built by All American Drive Service, with a x-mod, cryo treated and a shower cap. Anyone see any problem with letting PBC build an Outdrive and do the Fiberglas/gelcoat repairs?

They'll do an outstanding job just as they are known for.

Call Bobby at PBC. First class crew.

All these people telling you to go to PBC can't be wrong :cartman:

pbc for shure! and not surprised that bergers got lost they need to stick to stock stuff

http://bravoshop.net/

I'd give John a call. All he does is drives and does them very well. He is opening a new facility at loto this fall and he will quickly become the go-to shop for all things Bravo and Alpha related.

Thanks for all the comments!!

Brett
Performance Boat Center

Has anyone had any work done by competition marine in Moscow Mills Saint Louis area?

Check with Complete Marine in St. Charles (They're in with St. Charles Boat and Motor.. The Complete Marine) - ask for Zeke.

+1 if you're in the St. Louis area... good guys and they've always treated me fairly.

x2