Re-Rigging 30 Motion
 

Its like christmas around my house this week! My new 250xs's came in and we have begun re-rigging my motion. More pictures to follow!!!!!

We are still working on Steering, Fuel System and Gauges. Should be on the water in a week!

Looks great Don.

Once you hit the water, all of you hard work will be worth it.

Thanks Frank. I am ready to get back into a fast boat! Running the diesel has been fun but with a top speed of 50 or so it can get rather boring on long runs. I need some speed!

Nothing like a good fast evening run to clear your head .Looking good.

Late last night we finished rigging the boat! We will bleed the steering tomorrow, run the engines and then we are off for a sea trial Friday! I can't wait!:evilb: I will post some pictures when we make it to the ramp.

Aesome set-up you have there..should run great..Good luck..Joe:drink:

Thanks, You had a 30 Motion with 300XS....... How did it run? What props were you running? How fast?

Thanks

Finally got the boat running this weekend! It ran great and is very fuel efficent. After about 3 hours of run time we made a hard pass at 94.5mph and it was still climbing when we shut it down. I was seeing 17 to 19 psi of water pressure which seems to high so the motors have to go up! This thing should run close to 100mph when we are done. Needless to say I am really happy with this set up.

Don,

Your boat look great!

You are going to love those OptiMax motors. Smooth, strong, dependable, and very fuel efficent.

I beleieve the system monitor shows fuel flow, what was it at wot? I am guessing 20gph per motor, or so?