Re: Come on MTI boater let's see your boats
 

What size/layout hull are you building? What HP sterlings?

42MTI and I are going thursday the 25th...

Sean

Re: Come on MTI boater let's see your boats
 

42 PR with 1100 HP Sterling power and Mercury #6 outdrives

I will be in Houston on business the 24th, 25th and 26th

Eddie

Re: Come on MTI boater let's see your boats
 

What is that a 39 or larger. Looks fantastic!

Re: Come on MTI boater let's see your boats
 

It is a 42 PR, the same thing Fountain Driver is building. It is actually Randy and his Bother-in-law's boat,Greg. I belive Greg is going to buy Randy out of the boat so him and Woods don't sell it. It will be a 1075 #6 boat. should be at the shoot-out. I will post some more pics of it when I get to my office. It is a beautiful piece. :D

Re: Come on MTI boater let's see your boats
 

Sean and 42 MTI..have you guys went to the factory yet? My wife and I are thinking about heading up there this Friday if possible. What all is there to see at the factory...do they have any finished boats? Neither of us have had the chance to look over the MTI and we were wanting to check it out before heading down to Pier 57.

Re: Come on MTI boater let's see your boats
 

Been there many times. Right now the 55 is the only boat being laid up there, the others are being built in Green Bay and sent to St Louis to be rigged so there will be plenty of finished boats to see. Randy is out of town for 2 weeks so you wont' get to meet him which is unfortunate because he is a great guy and very knowledgeable. However his partner Gary Stray should be around and he is equally as great of a guy and knowledgeable.If your ever down at Grand you are more than welcome to come by and look at my boat or Rare Breed or go for a ride. We are at Cherokee Yacht Club, "E" Dock.They are very impressive machines. Mine should be around this weekend and will be gone the next two to poker runs.

Re: Come on MTI boater let's see your boats
 

Rare Breed should be back at Grand this weekend , if I get around to go to Dereberys and get it!

Re: Come on MTI boater let's see your boats
 

That is nice looking, I'd like to see more pics.

Re: Come on MTI boater let's see your boats
 

I have a couple of good pics, but they are a little to large to post and I don't know how to resize them. If someone can tell me how, I will post them.

Re: Come on MTI boater let's see your boats
 

I use "HP image zone" It must have came with my computer or from my printer.
Anyway, use any photo software, find the image, then there should be a resize or edit tab. You can crop and resize pretty easy, just look through your programs to find your photo software.